Your company has a server named DC1 that runs Windows Server 2008 R2. Server1 has the DHCP Server server role installed.You find that a desktop computer named Computer1 is unable to obtain an IP configuration from the DHCP server.You install the Microsoft Network Monitor 3.0 application on Server1. You enable P-mode in the Network Monitor application configuration. You plan to capture only the DHCP server-related traffic between Server1 and Computer1.The network interface configuration for the two computers is shown in the following table. Server1 Computer1 IP address 192.168.2.1 169.254.15.84 MAC address 00-0A-5E-1C-7F-67 00-17-31-D5-5E-FF You need to build a filter in the Network Monitor application to capture the DHCP traffic between Server1 and Computer1. Which filter should you use？（）

• A、IPv4.Address == 169.254.15.84 && DHCP
• B、IPv4.Address == 192.168.2.1 && DHCP
• C、Ethernet.Address == 0x000A5E1C7F67 && DHCP
• D、Ethernet.Address == 0x001731D55EFF && DHCP