Refer to the exhibit. Currently the two eBGP links between AS100 and AS200 have an average inbound load of 65% and 20% respectively. After further investigation, traffic to 10.10.1.16/28 accounts for 45%, and t raffic to 10.10.1.32/28 and to 10.10.1.48/28 each account for 20% of the inbound load. The BGP attributes are currently set at their default values in both autonomous systems. If you want to influence how AS200 sends traffic to AS100, which eBGP configu rations would you configure in AS100 to influence AS200 to use the eBGP links more evenly?（）

• A、neighbor 192.168.30.2 route - map as_50 out
• B、neighbor 192.168.20.2 route - map as_50 out
• C、route - map as_50 permit 10   match ip address 50   set metric 150   a ccess - list 50 permit 10.10.1.16 0.0.0.240
• D、route - map as_50 permit 10   match ip address 50   set metric 150   access - list 50 permit 10.10.1.32 0.0.0.240